Makes Led Nail Lamp So Addictive. The difference between a UV and an LED nail lamp lies in the kind of radiation that the lamp emits. Nail polish generally contains photoinitiators, which require specific UV rays to be activated or harden. LED lights, on the other hand, contain energy efficient diodes that emit light without the need for ultraviolet light. The light emitted is often stronger and more directed, allowing more gel nails to be created in the same amount of time. The bulbs used are also typically longer lasting.
So why is a led nail lamp better than a UV? One major difference is longevity. An LED lamp will typically last up to three times longer than a conventional nail lamp. It also has the added benefit of being able to work in a number of different conditions and environments, which allows it to be used in applications beyond nail studios and salons.
How does a nail lamp operate? A traditional lamp works by applying an opaque coating to a nail and exposing it to ultraviolet light for 30 seconds. Once the light has hardened the gel is applied. Once again, the exposed area must be painted over after about 30 seconds to create an opaque covering. This is why traditional nails must be colored after being exposed to UV lights.
 |
inch legendă Nedrept uv nail lamp – blkmrktdesigns
|
There are two types of LED nail lamps, with differing degrees of efficiency. High intensity discharge lamps or HID lamps use a constant current (CRI) and a high voltage. LED lamps use a different method called pulse width modulation, or PWM, which produces a constant current but with variable pulse width. The result is a lower voltage, enabling greater power density and less heat dissipation.
LEDs come in a wide variety of colors. They also have different levels of brightness. The highest quality LEDs emit light much more brightly than other types of bulb. One drawback is that they cost more than lower quality bulbs. LEDs also require less energy than HID. This means that they will save you money on your electricity bill over an extended period of time.
To install an uv led nail lamp, simply cut a hole in your nail, glue the lamp somewhere on your nail, then insert the soldered bulb. You can then either paint the lamp or leave it in its untied position. You can also purchase a clip or bead based polish to cover the base of the lamp. When you first put the lamp on your nails, you may notice some white residue coating the base. This residue is not harmful to your nails and will wash off in a few days.
This lamp works well with regular nail polishes because regular nail polishes tend to chip or wear the thin layer of film that protects your nails. This thin layer of film is very fragile and can easily be chipped away by excessive heat. The film will usually last for several months but will start to chip after that. Using an uv lamp will help protect your film.
To get the best results from your lamp, follow the instructions included in your uv light kit. The lamp is designed to emit light only under high heat so if you are using regular polish you will need to remove it before starting your manicure or pedicure. If you are using an uv light to help fade scars, you may need to run the lamp under low heat settings for longer periods of time.
Most uv lamps have two different wavelengths that can be used. The ultraviolet (UV) light is more commonly used for skin toning and tanning while the infrared (IR) spectrum is often used to help fade scars, tattoos and birthmarks. Using the appropriate spectrum for the application you are applying to your nails should ensure the proper protection.
Nail lamp bulbs vary depending on the type of lamp you buy. Generally the lights that come with uv lamps emit uv rays in the green (not blue) spectrum. This means that if you buy a lamp that uses the green spectrum, you will need to use less nail polish to achieve the desired results. You can also buy special blue uv light bulbs. These will be required to be near an incandescent light in order to generate the right amount of uv light needed for your purposes.
Once you have the nail lamp home, follow the instructions that come with the lamp to apply the nail polish. When using acrylic or gel polish, it is best to use a cotton swab in order to apply the product as thin as possible. As each coat is applied you can wipe away excess polish using a soft cloth or cotton ball. It is very important that you take care of your new uv nail lamp properly to ensure that it is able to provide you with the best results possible. In doing so, you will get a beautiful, shiny finish that will last for a long time.
